Air conditioning is a
modern wonder. It’s also an expensive luxury and a total drain on the
environment. Most buildings address thermal control on a structure level by
building in HVAC systems, but two designers from Paris think there might be a
better way, or at least an alternative way.
“We wanted to see if it was possible to address
climate and energy issues on a furniture scale,” says designer Jean-Sébastien
Lagrange. The designer, along with architect and engineer Raphaël
Ménard, developed the first piece in their Zero Energy Furniture
line: a table that can store excess heat and release it when a room gets cold
again.
At first glance, the Zero Energy table looks like an
ordinary wood conference table, but hidden underneath the slab of oak is a
sandwich of materials that turns the table into a thermal sponge of sorts.
Between a layer of corrugated aluminum is a waxy phase-changing material that
softens when the room reaches about 71 degrees Fahrenheit.
Imagine the hot afternoon sun is blaring into your
conference room’s windows. As the temperature climbs above the temperature
threshold, the wax begins to store this excess heat like a chipmunk hoarding
nuts in its cheeks. When the temperature drops below 71 degrees, the material
begins to harden, releasing that stored heat back into the room via the
aluminum’s wavy geometry. According to Lagrange, the result is a palpable
difference in the room’s temperature.
This isn’t an entirely new concept—phase-changing
materials have long been known for their ability to store and release energy
like heat. Lagrange and Ménard simply harnessed this science and embedded it
into a compelling industrial design, which they hope to begin selling later
this year.
The duo says under optimal conditions—a small
conference room fit for around 15 people—the table is able to reduce up to 30
percent of the energy consumed by air conditioning. Of course, the table
is rendered pointless if the room never breaks 71 degrees, so it helps if the
temperature range is expansive.
Still, it’s a interesting idea, particularly when you
consider the cost and energy savings it could produce during a building’s off
hours. Instead of turning on the heat overnight, a building could use the heat
stored in the table throughout the day. The team is looking to incorporate
the same principle in lighting design, where it would be easier to harness
excess heat, but they have plans to build it into all sorts of home goods.
No comments:
Post a Comment